Drawings that get built.

I can take a brief
to a design
to a drawing
to a fabrication that works.

Drawn: J WALL
Discipline: MECHANICAL
Standard: AS 1100
Status: ISSUED FOR REVIEW

Qualifications: Dip. Engineering (Technical)
Cert. III in Aviation (Remote Pilot)
In the works: Adv. Dip. Engineering
Previous tertiary study: Mechatronics
→ 19 courses
Software
→ 5 courses
Awards: Warman comp — 4th, int’l
Hunter Water Scholarship

Featured

Completed Warman cascading crane on the competition table

Warman Design & Build

Fusion · Mechanical design lead · 4th at International Final

A static cascading crane with vessel handling to move hazardous-material vessels between drop zones and silos. I led the mechanical design, modelled every component, and 3D-printed and assembled the crane.

View project

Drawing

Technical drawings developed from client specifications, utilising relevant techniques, and issued to AS 1100

Ball towing coupling

Inventor · Breakout view · Exploded assemblies

Complete set of fabrication and detailed assembly drawings.

View project

Pivot bearing drawing with rendered isometric and dimensioned views

Pivot bearing & base

AutoCAD · Third-angle projection · Rendering

Surface-modelled components presented as brochure drawings, with physical properties and machining callouts.

View project

Belt tensioner

Inventor · Section views & hatching · Fits & tolerances · Exploded assemblies

Modelled non-standard geometry and machinable parts, and provided detailed assembly and component drawings.

View project

Sectioned harvester bearing block assembly drawing with parts list

Agricultural machinery refurbishment

AutoCAD · AS 1100 · Section views · Fits & tolerances

Replacement components for refurbished equipment; sectioned assemblies, component details, surface finishes and clarified limits of fit.

View project

Design

Conceptual design assessments

Tactile music puzzle

Fusion · Mechanism design · Human-centred design

A four-cylinder music-box puzzle built around Beethoven’s “Ode to Joy.” Touch and sound reveal the correct sequence, while colour is deliberately used to mislead.

View project

Tetrahedron

Fusion · Concept modelling · Systems thinking · Visualising complexity

A modular tetrahedral model that combines three conceptual frameworks, using magnetic interactions and ferrofluid to reveal relationships.

View project

Prototype

Designs taken to manufacture, and revised against what the testing showed

AMVR battery and custom adapter fitted to the headset

VR headset battery

Reverse engineering · Interface design · Prototyping

Reverse engineering a non-standard battery curvature into a fabricated adapter.

View project

Original light-coloured counterbalance cable pulley beside the dark fabricated replacement

Neolt drafting desk

Reverse engineering · Mechanism interfaces · Prototyping

A replacement non-standard cable pulley modelled from the original part.

View project

Filament dehydrator

Concept development · PETG fabrication · Design adaptation

Adapting an off-the-shelf appliance, and adapting a conceptual design to a practical one

View project

QIDI I-FAST printer on its completed custom cabinet

3D printer ventilation

CAD interfaces · Cabinet fabrication · Ventilation integration

Custom printer cabinet, interfaces, flexible duct routing, and filtered window outlet

View project

Analysis

Software models with verified sources, and sensitivity testing for technical reports

Contour plots comparing energy-system costs across turbine and battery options

Sustainable engineering practice

Lifecycle analysis · Multi-criteria assessment · Technical reporting

Product lifecycle analysis, Coonabarabran and Upper Hunter regional energy studies.

View project

Heat-exchanger outlet temperatures versus mass flow

Thermofluid calculation models

Excel · Energy balances · Sensitivity analysis

Interactive pipeline, heat-exchanger and vacuum calculations.

View project

About & Contact

I hold a Diploma of Engineering (Technical) and I’m currently working through the Advanced Diploma at TAFE NSW Tighes Hill, after studying engineering part-time at the University of Newcastle across mechatronics and software.

Day to day, I work in an industrial workshop, which is where the drawing office and the shop floor meet — and is the reason I draw with manufacture in mind rather than as an afterthought.

Open to mechanical design, drafting, technician, and project support roles across the Newcastle & Hunter region, NSW.

Qualifications
Rev	Date	Description	By
E	2026–	MEM60122 Advanced Diploma of Engineering — TAFE NSW Tighes Hill	JW
D	2026	AVI30419 Certificate III in Aviation (Remote Pilot)	JW
C	Feb 2026	MEM50222 Diploma of Engineering — Technical	JW
B	2016–2023	Engineering coursework, University of Newcastle — mechatronics and software	JW
A	-	Forklift · White Card · Work Safely at Heights · Remote Pilot Licence	JW

View resume PDF ↗

josh.wall97@gmail.com